I have a 910 D2 coming in 9.5 with Aldila RIP stiff.  It should be here today but think it's gonna be next week sometime.  It will replace my 909D2 10.5 with Aldila NV 65s.  Think my settings will be high draw, not sure of code, but want to hit some proV1's with it before I settle on settings.

Been in the bag since November 17th

Titleist 910D3 8.5* w/ Matrix Ozik HD6 X-Flex at C1 SFT Setting

This combo have lowered my spin rate and lanch angle a little over my previous 909D3 8.5* w/ Ozik F7M2 LTD

as well as given me more swing speed and ball speed due to the lighter weight

how much did that cost you? club + shaft?

Chris,

I just paid for the stock 910 at $400. The Tour Van shaft was installed by a friend who is a Fujikura rep. No other money was exchanged. as far as i know, it is a $200 shaft. I'm sure you could find it a little cheaper, if you can get one. It's not on the Fujikura order list.

I have since played a few rounds with it since my last post, and i can tell you it is absolutely phenominal!!! I am a low single digit handicap and wouldn't recommend it to many people, but if your a strong player then i can highly recommend it. You can feel the clubhead through the whole swing. the Motore F3 80  really loads energy, and combined with the clubhead make for an explosive tee shot.

My new D3 should be here today.  I was fit by RC here in Austin and it was amazing.  I hit the new Fujikura Montore, Aldila RIP, Ozik, Project X and the Diamana Whiteboard.  I found the Whiteboard to be the best shaft for me in achieving the feel at impact that I was looking for.  With RC we were able to fit the head around this shaft and my launch numbers.  What we came up with was  a club that I feel like I can go after and hit the ball as hard as I want without fear of it going left.  I'm very cautious of "closed" looking clubfaces and the new technology, sure fit system, allows that to be take away. 

My 910 D3:Diamana Whiteboard 73x in the C-1 Setting.  Will be 45 inches long. 

I was fit a week ago at Miles of Golf in Ann Arbor Michigan.  Miles is an exceptional facility and their custom fitting is second to none.  Anyway, after about an hour of going through the various combinations of heads and shafts, I was fit into a 8.5 D3 with 60 RIP set to the C1 setting.  This came as somewhat of a surprise because previously I was hitting a 909 D2 in 9.5 extremely well.  However, the numbers where showing that I was spinning the ball too much with the D2 and my left miss was being over exaggerated.  Needless to say, the D3 fits me to a tee and is suprisingly  more forgiving, especially for my quick left miss.   Also, with the reduction in spin I gained 10-12 yards with the D3 setup.  I should be receiving my new driver in about a week, unfortunately just in time for winter.

Nice Josh!   How about a report from the field! 

I am still trying to figure out my setting.  I'm a shaft setting 1 guy and it's either going to be C-1 or B-1. Flatter lie.  910D3 8.5 Project X 7a3c shaft is excellent.

This is me (wearing a light blue pullover) and my son Leonard proudly presenting daddy's new Titleist 910 D2 9,5 A1 Driver with Fujikura Motore F1 Regular Shaft (65gr).

As there is decent snow in Cologne, Germany I was not able to test it on the range. So all I can do at the moment is look at it and remember my fitting session 1 week ago...

...and of course spending more time with my family.

Tom

Thomas F

Great picture Thomas.  Looks like Leonard may not give it up when the snow melts.

Enjoy the family

Deno

910D2 8.5 ahina stiff

this gave be the best number and just ordered the matrix HD6 as a 2nd shaft to try. I hope I bomb it with the new shaft

Got fit today by the Tour Van and realized how important it is to get PROPERLY fit.... Short story is leaving my TM TP SQ 9.5 with Matrix X-Con 5(S) behind for the D-2 9.5 with Javlin 8m series in S. Averages a 27 yard pickup!

I too was fit by RC in Austin. He is the best around, make the trip to go see him. I was fitted for a 910 D3 10.5 Kai'li in the C-1 setting. I too was looking for a "anit-left" setting and we found it! This club is a fairway finder for me. I was so pumped, I went back and was fitted for the 910 F in a 17* 'ilima in an A-2 setting. Pretty cool how you can fit each club to meet your personal signature in each swing. I am now officially all Titleist.

I have been fit by one of the best Titleist Reps in the business. BD knows what I was looking for and when he was done tweaking me I picked up 15yards(910 D3 9.5 with the Aldila RIP cut an 1inch short. I gonna kill it in the spring!! The problem is our season is over so I can only look at my new 910 Driver and dream about how good the 2011 season is going to be. I can't wait!!!!

I was Fitted at Haig Hall in Wigan Lancashire. Ian Leigh did a great job , the club is fantastic and i recieved it on the 15th !

Mine is a 910 D3 Diamana Kia Li Blueboard Stiff Shaft setting is A1 

Just got mine!!

D2 10.5 Stiff Kai'li @B1

Fitted at the TPI in Oceanside.  Great experience working with Jim Watkins!  The feel of the driver is tremendous!!  Doesn't hurt to pick up a few more yards too!!

I was hitting a TM R7 limited and liked it, so as soon as the R11 came out 2-4-11 i bought one from Dicks Sporting Goods which for some odd reason does not sell Titleist woods so i did not have the luxury to compare the two. Afterwards i took the R11 to an outdoor range and within minutes realized this was a big mistake this was not the club for ME it felt and sounded way to harsh although the white crown head was cool at first it wasn't long i was craving for a sexy black driver so i went in the club house and got a 910D2 10.5 Rip stiff adjusted it to the C3 (high draw) set down and boom just as advertised mid/high draw! Sweet feel and smashing sound of authority extremely comfortable to address at setup very glad to see Titleist has a stock 45" shaft which i believe makes this club so consistently straight and forgiving. I have bagged this Titleist 910D2 winner along side my TM FW, Hybrid and burner irons (i love them to much to even think of switching) and so far they get along just fine. A special thanks to ALL the club manufactures and  especially the R&D departments for making this sport a little easier and enjoyable!

Tom

New 910 was put into bag on 15th. Increase carry by 12 yards and tightened up dispersion using flightscope. Just need to let it loose on the course!

Specs: 910 D2, RIP 60S shaft, A1. 

I'm pumped! Just got my new set of 710 CB irons (DG S400), Vokey Wedges 52 (bent to 51), 56 (bent to 55), & 60, and most importantly, my 910 D3 10.5 w/ Project X 7B3 setting B-2.  I have the 910 F (13.5) and a 910 H (19) on order for February.

Gorgeous! I am so impressed by the aesthetic design of the new drivers.

How you liking the new Wedges? I've noticed that my new Vokey's consistently take the cover off the ball on any soft cover ball. Are you experiencing that?

haven't had any issues with the new C-C Vokeys tearing up the cover... I did with my older Vokeys but the new C-C models haven't had any problems

well played my 910 d2 9.5 with RIP stiff set at c3.  Hit it 13 times.  10 fairway, 2 first cut and 1 fairway bunker which I was told I wouldn't be able to reach!  40 pts, nett 66 and took the cash.  My playing partner said on the 18th "you are really hitting that great today"  my reply, "I'll tell my wife you said so when she sees the credit card bill"  Very Very impressed and happy, now have to save for the fairway and rescue.  Thank you Titleist.

I'm still waiting as patiently as can be expected for my new 910 D3 9.5 with the kali'i stiff shaft.  No photos yet.  Fortunately (or unfortunately) it's raining here in So Cal this weekend so I'm not playing anyway....

Went to my fitting on Friday, tried a couple of settings and found that the B2 setting worked best for me... 9.5 degrees Diamana Kai'li stiff shaft, played yesterday and absolutely love this driver

I have twin 14 year old boys who just received their Titleist 910D3 drivers. We were fit on the Trackman in Ann Arbor, MI. What a great experience. Each son spent an hour on the Trackman trying different shafts and settings to see what worked best for them. When the fitting was complete, our curiousity was peaked as we waited for the driver. The following were the specs for each son:

Setting was 8.5 910D3, A-1 (neutral) Project X - 7C3, 73G-6.0 Tip-Stiff

Setting was 9.5 910D3, B-1 (a bit closed) Diamana 65 Mid Stiff

While they are twins, each swing and style are totally different. My hat is off to Brent K. who did our fitting. Not only does it appear the selected shafts are correct for each player, I find it amazing that the face settings that were defined during the fitting were so accurate. Especially the setting of B-1, that son's ball trajectory started a bit more right than his R-9. Biggest difference I see is that Titleist Drivers are about a half of a degree open where most other drivers are biased to the closed side. When Brent adjusted the face, the direction off the Tee was exactly where he aimed with a slight draw and he did it over and over.

The other son has been playing Titleist since he was first fit. He is replacing a 909D3 which he hit incredeibly well with the 910D3.

I am extremely pleased with Titleist equipment and golf balls. One son has played Titleist equipment for the past 3 years and is ranked 25th in the class of 2014 by Junior Golf Scoreboard. The other is ranked quite high as well and is now converting to Titleist equipment. I was a big TM fan. I let my kids select what equipment they wanted. I am now a HUGE Titleist fan and wherever golf takes my sons, you can bet Titleist will be in their bags. Please know, I am telling parents I run into about how good this experience has been.

Thanks again for a great experience.

Doug DeMarois 

I just did an on-course demo yesterday with the 910 D2.  This is hands down the best driver i have ever hit.  I placed my order today for a 910 D2 9.5 deg with the project x xstiff shaft.  I had the surefit set at B1, and I had the 12 gram weight in the sole.  I hit the driver on 11 holes, and i missed 2 fairways by a combined 3 yards.  i was hitting this driver 5-10 yards further than my 909 D2, and the trajectory and shot dispersion were markedly better!  I am a 20 year Titleist loyalist, and by far, this is the best driver that has ever come out.  Thanks, and I can't wait until my driver comes in!

My fitting was done about 2 months ago while the Nationwide Tour was in town, it was an interesting experience with all of the Titleist guys here for the Nationwide, I got to try several shaft and loft choices and the one that seemed to fit my compact swing best is the D2 9.5 (SFT) B2 with the Regular Flex 'ilima 61 (Red Shaft).

I picked up my D2 Saturday from the Pro Shop and was able to get one round in with it, and alI I can say is WOW am I pleased with the results, I have not hit anything as straight and this long in many years, even on off center hits this thing still gets the 'ol ProV1 out there. At 60+ years old and 30+ years of Golfing I thought I had tried every game inproving club out there, but the D2 is in a league of it's own, great feel, great sound and over the top results, I can't wait for the Fairway Woods and Hybrids to get here!

Thanks, Ken

Cold weather is here and unfortunately, I'll have to wait until Spring.  Besides, who wants to stare at a gorgeous new driver and not be able to go hit it?  But I can't wait to get fitted and start splitting fairways.

I just ordered my new 910 D3, unfortunately I had to be fitted by a very knowlegeable ping rep in the MD area because the Titileist rep was finished for the season. Hopefully the ping fitting will apply to the 910 with project x shaft, 6.0 9.5 loft and tipping at .5.

Hey, B Chap here. I have a 910 D2 Diamana ahina X stiff shaft and I love it.  I get about 10 more yards. I played Monarch Bay Golf Course in SanLeandro, Ca. last week and shot 68. I hit 12 fairways thanks to my new Driver.

Got my new 910 driver on the weekend. I was pleasantly surprised how quickly it arrived. I only managed a couple of middle of the club swings on Sat but they were long and straight. On Sunday I found the middle of the club with almost every swing, boy is this club sweet. The noise and feel of it are amazing, so easy to swing with fantastic results, long and straight. I've always had a high fade, but with my 910 I am hitting a lower straighter trajectory that also gives quite a bit of roll out also. Thanks to Alex and Dylan at Pyle and Kenfig for sorting me out. 

I was lucky enough to play the 910 in early October and be fit at the same time.  The new club is great with a hotter face and larger sweet spot.  I have a D2 with Kai'li 65 shaft set at C2.  Played a full 18 with the new driver last Sunday.  At 58 it has been a long time since I've hit a drive almost 300 yards.  Almost made it Sunday with the new 910, about 295 yards on the 17th hole with a slight helping cross wind.  Hope you all get the new 910 and work to find the best settings and shaft for your game.

Hammer52

Tulsa, OK

I was fitted recently for my 910 D3 with 9.5 gegrees of loft in the A 1 position and a Motore F3 80 shaft. After hitting four quick balls on the range,  i went to play.

What an amazing golf club. I was able to make an smooth agressive swing and found the dispertion shot after shot to be very tight. I also picked up yardage which is surprising in the current cold weather of the NorthEast region of the country. I cant wait to get next season under way. This driver will make a huge difference in my confidence level.

Titleist has made the best drivers for a long time. The new 910 is the best ever, and frankly speaking, i dont know how they can ever top it. This club is PERFECT.

Ordered the 910D2 10.5 with a diamana kai'li 65 stiff shaft. Ive played ping since i started to golf and saw this driver and needed to try it. So i did and wow is it great! pure feel and very consistent. Ive always struggled to get the ball up with my woods and have no problem with this, i usually hit a 10.5 and i have taken it down the 1.75 available becuase its that easy to get the ball up. Ive always played vokey's. and now im debating ditching the g15's for the ap2's. Great job on the driver titleist. hope the fairway wood is just as good. 

Got my 910D3 8.5* in yesterday, with the RIP 70 Stiff, tipped a half inch to play between a stiff and an X. I play college golf so I have had the opportunity to hit many drivers and I have not felt a driver that felt this smooth. The most impressive thing was that it booted my 905R out of the bag without any second thoughts. Titleist loyalist and it looks as though it will stay that way. Most amazing driver from Titleist to date.