September 26, 2013
They probably are a degree or two (or three!) weaker than competitor clubs. miz MP-54 PW = 46. Current AP2 is 47, png G20 is 45!!!. When you place...
September 26, 2013
You can get the loft adjusted up to 2 degrees, but then you'd need to recheck your gaps between wedges and irons and metal woods and irons....
September 19, 2013
Jeff, You can find a copy of the loft / lie settings on the Titleist website under the fairway / hybrid section. If you are specifically wanting a...
September 07, 2013
I have a mix of older 910s in my bag along with the new 913d. They have different setup charts, both of which I've lost Where can I go and get copies...
September 04, 2013
Options include - Choking down - cheaper than buying/cutting the shaft down to the length of the 17FW. Adjusting the head a little more closed and a...
August 30, 2013
Can't tell anybody much about the drivers but can tell about fairways and hybrids. 910H 27* worked best for me on the D3 setting. A3 would go 5 yards...
August 29, 2013
Hi Greg, The effective face angle only comes into play if you sole the club. If you square the clubface at impact to hit it squarely, all you have...
August 29, 2013
Hi Cathi, I was recently made aware of this by my teaching pro. What would be useful is to know how much the effective face angle is when you...
August 29, 2013
Your coach is right. When you lower the loft, the effective face angle is open and when you raise the loft, the effective face angle is closed if you...
August 26, 2013
Yes. Similar to you, as I move up my bag, I hit less and less of a draw to the point where my 3 and 4 irons generally have a bit of a fade. The irony...
August 21, 2013
The adjustable clubs (D/F/H) can have their loft increased from labeled to +0.75 which will change the face from 0.5 open to 0.5 closed, which is a...
August 20, 2013
[quote user="Craig D"] Recently purchased AP2 712's as an upgrade to my AP1 710's. It appears the lofts are 2 degrees weaker on the AP2's in the 6-PW...
August 15, 2013
Well, I went and had the irons adjusted...needed to go 2 degrees flat...WOW! Almost perfect! At the range afterward, I adjusted my driver to...
August 13, 2013
The move to C2, while adjusting lie to more draw, moved the effective club face from 0.5 degrees open (standard) to 1.5 degrees open. Looking at the...
July 30, 2013
The AP1 4 iron is 23 degree and the 4H (24 degree) matches the loft of the AP2/CB/MB irons. Lou provided the assessment of the distance gain with the...
July 30, 2013
I would adjust the 913H to reduce the loft a bit. I think that may help fill the gap between your 4 iron and 4 wood a bit better.
July 30, 2013
Hi Charles, We do not supply the wrench with the fairway or hybrid. If you feel there is something not right with the playability of the club for you,...
July 26, 2013
It really depends upon your distance gaps at the top end. You go from 25 degrees on your 4-iron to 15 degrees in your hybrid which is a pretty large...
July 25, 2013
Thanks Sent from my iPad On Jul 16, 2013, at 8:17 AM, "David Browning" wrote: David Browning replied to Re: Hybrid loft changes in Club Fitting....
July 22, 2013
[quote user="Thomas B"] I am a relatively new golfer, right at 2 years, HCP 23 but recently shot two rounds in the high 80's......what is the proper...
July 16, 2013
[quote user="Lou G"] I have all my wedges' lie angles bent to match club lengths (most people leave them the same as the PW). My SW (54) is 1/2*...
July 16, 2013
Jerry, if you adjust it to the D1 setting, it'll take it down to 23.25*. It you had a 21*, you could adjust it to the A4 position to get 22.50*. Hope...
July 15, 2013
[quote user="Jerry G"] I just got fit for 2 913 hybrid's. Wanted a 23 degree, but since it isn't available, took the 24 & was told it would be set at...
July 02, 2013
I know many of us have tinkered with our weights in the driver, fairway metals and hybrids... I would even appreciate the ability to adjust my...
June 26, 2013
Thanks for bumping this Philip. The topic remains confusing and the chart inadequate to give definitive help with settings. According to information...